Edge Assist Limited
Call
The infeed of a long edgebander line with return conveyors running beside it

Completed servicing, adjustments and repairs

Edgebander repairs: our work

Machines on site, the insides of them, and the worn parts that came out. Every photo here is from a real Edge Assist job.

07961 849601

Makes we work on

  • Biesse
  • SCM
  • Homag
  • Holz-Her
  • IMA
  • Casadei
  • Cehisa
  • Hebrock
  • OAV
  • Nanxing

Photos from real jobs

36 photos. All ours.

Filter photos
  • A Casadei Flexa 507 edgebander on a factory floor, its touch screen raised over the infeed
  • An old orange glue pot on an edgebander, burnt glue round the edge of its lid
  • Trimming units on an edgebander: grey pressure rollers over the feed track, yellow extraction hoses below
  • Two Hitachi L200 inverters in a cabinet, one showing a fault code
  • A Holz-Her Auriga 1308 XL power edgebander under black extraction ducting in a brick workshop
  • Two pneumatic cylinders side by side: one corroded and worn, one new
  • Inside an edgebander with the hood lifted: motors, air regulators and units
  • Schneider breakers and contactors in an edgebander's electrical cabinet
  • A Hebrock F2 edgebander with its touch screen, rows of tooling on the wall behind
  • A hand holding a lump of blackened, burnt hot melt glue taken out of a machine
  • An edgebander with its covers off, units and air gauges laid bare
  • A motor terminal block held in a hand, wires off for testing
  • A Holz-Her Streamer 1057 XL C edgebander, its orange feed rollers running away down the outfeed rail
  • A gloved hand holding a block of three pressure rollers coated in old glue
  • A trimming unit and its air cylinders, warning labels on the guard above
  • An open motor terminal box, red and black wires on brass terminals
  • A Holz-Her Artea 1030 edgebander in a workshop, an air compressor beside it
  • A worn cutter held against a Holz-Her motor, the motor's rating plate showing
  • Pneumatic valves and air lines inside an edgebander
  • Earth and terminal wiring inside an edgebander's electrical cabinet
  • An OAV edgebander under silver extraction ducting in a workshop
  • A cutter on its spindle, sawdust caked round it on a red machine bed
  • The touch screen and run, stop and emergency buttons on a Huahua edgebander
  • The control panel of an older Holz-Her edgebander, temperature readouts and switches
  • A Nanxing edgebander in a factory, cables laid out on the floor around it
  • Hot melt glue scraped out onto offcuts of board on a bench, spanners beside them
  • A trimming unit inside an edgebander, its extraction hose and cover open
  • A junction box on a machine frame with its wiring opened out
  • A long Casadei edgebander in a workshop, a panel trolley parked beside it
  • A unit inside an edgebander with its label and a green tag
  • An NB671DNC Edge Tech edgebander with its long outfeed rails
  • The infeed fence of an edgebander, an emergency stop button above it
  • A long edgebander line in a sunlit factory, a roller table beside it
  • A KDP 200 edgebander in a workshop
  • A new edgebander line set out across an empty factory floor
  • A Holz-Her edgebander in a workshop with a red roller shutter behind it

Every hour of downtime matters

Machine stopped?

Have the make and model to hand and ring. Or tap what is happening and we call you back.

Call Edge Assist07961 849601
edge-assist@outlook.com
07961 849601Describe it